A brilliant start at the Chemnitzer Firmenlauf 2017

Our team for the Chemnitz Firmenlauf 2017

In addition to our super runners, who once again this year gave their best, a creative team was at the start for the first time. With a lot of attention to detail and commitment, one of our enduring tested ion beam sources has been constructed for racing use. Reaching the second place did not only make the source shine, but also the members of the "Raketenigel" team.

We would like to thank the runners for the numerous participation and hope you had a nice sporty evening. We look forward to next year!

Participation on joint project – DANAE

Funded by EFRE

Together with the project partners scia Systems is working on the development of thin film and matching technologies for nanoscale acousto-electronics. The objective of the collaboration is to establish the preconditions for depositing and trimming of materials needed in the acousto-electronic industry as well as the development of required components. The topic of scia Systems is: Trimming technologies and the development of components for manufacturing of nanoscale acousto-electronic devices.

Participation on joint research project - NanoTools

scia Systems takes part on a joint project for the development of coated micro cutting tools based on nano wear-protection layers. The objective of the collaboration between industrial companies and R&D institutes is to provide a scientific-technical base for the reliable industrial use of ALD coatings (ALD - atomic layer deposition) and ion beam coatings (DIBD – dual ion beam deposition), in comparison to PVD coatings, as well as to define their field of application. more details

scia Mill 150 for the University of Leeds

University of Leeds

The School of Electronic and Electrical Engineering at the University of Leeds has awarded scia Systems the contract for a new ion beam etching system. We are looking forward to delivering a scia Mill 150 to the university. This tool provides the flexibility needed to meet the diversified requirements of a multi-disciplinary research environment. read more

scia Systems received a Supplier Excellence Award from Qorvo

scia Systems  as a supplier of wafer processing systems for milling, trimming, and deposition of thin films, has received a Supplier Excellence Award from Qorvo in appreciation of scia Systems’ quality, on-time delivery, and support. read more

Fraunhofer FEP orders a scia Magna 200

The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP from Dresden works on the development of innovative production technologies for surfaceprocessing. read more

scia Systems joined SAWLab Saxony

The network SAWLab Saxony is a concentration of expertise in the field of acousto-electronic devices, which was brought to life by IFW Dresden. Besides the know-how of IFW Dresden, several local research institutes, universities and high-tech companies contribute to the network in order to generate an interdisciplinary research of international attention. scia Systems is glad to support the SAWLab Saxony with its technologies and experience in thin film technology, especially frequency trimming and is looking forward to a future-oriented cooperation.

scia Coat 200 for MPI Halle

scia Systems awarded the contract at a tender for an “ion beam etch and deposition system”. The company is looking forward to deliver a scia Coat 200 to the Max Planck Institute of Microstructure Physics in Halle next year. The system will be used as part of the Research on magnetic layers.

Team scia Systems Strong runners at the Chemnitzer Firmenlauf

Also this year, many sportive colleagues came together to participate at the "Firmenlauf" in Chemnitz for scia Systems As an innovation this time, there were three running teams. The fastest were our "IonMen" followed by "Flotte Igel" and "Plasma Runners".

We would like to thank the runners for the successful participation and hope you had a lot of fun and not too sore legs. We are looking forward to an equally broad participation next year.

scia Mill 150 for Technical University in Dresden

scia Systems awarded the contract to supply a scia Mill 150. The company is looking forward to deliver this systems to the Solid-State Electronics Laboratory (Institut für Festkörperelektronik) at TU Dresden end of this year. The system will be used for the basic process for the production of high-resolution pyroelectric infrared sensors. This is done by structuring of pyroelectric crystals in the µm-range and structuring of special metal layer systems.

scia Systems is member in the network of competence Inplas

scia Systems is now member of the Network of Competence Industrial Plasma Surface Technology (Inplas).  The common strategic objective of the network allows members to share and build their knowledge through lectures, specialized discussions, and joint research projects. scia Systems is looking forward to a successful cooperation with Inplas.

Successful first Sales Training

Sales Training

Two weeks ago the worldwide Sales Partners of scia Systems met in Chemnitz, to participate at our first Sales Training.

At the beginning we visited our partner VON ARDENNE in Dresden, who also held a Sales Meeting in this week. Afterwards our Sales Partner had deep insights in the product portfolio and the production area of scia Systems.

We like to thank all our partners for the lively participation and look forward to a successful cooperation in future.

One team for scia Systems

We like to thank our runners for represent scia Systems at the Chemnitz company run 2014 last week. We hope they had much fun and will participate also next year.

scia Systems delivered two scia Trim 200

scia Systems delivered two Ion Beam Trimming systems in June 2014 for trimming of piezoelectric resonators. These systems are necessary for cost effective mass production.

The scia Trim 200 system defines the leading standard for film thickness and frequency trimming. Fields of application are in manufacturing of SAW / BAW devices, thin film heads (TFH) and MEMS components.

scia Systems is now ISO 9001 Certified

After four months of preparation, scia Systems is now certified by DIN EN ISO 9001:2008. This certificate is valid for the development, production, testing and commercializing of components, process systems and vacuum process technology for coating, structuring and surface modification in microelectronics, MEMS, optics, photovoltaic and analytic products and services.

We would like to thank our employees for their professional and expeditious implementation of the DIN standards. see more

DIAS Infrared ordered a scia Mill 150

DIAS infrared

DIAS Infrared from Dresden, a leader in the field of infrared technology, ordered an Ion Beam Etching System scia Mill 150. The System is designed for etching of Lithium Tantalate used for the production of technologically sophisticated infrared sensors. read more

scia Systems is now part of VON ARDENNE


VON ARDENNE GmbH , a supplier of vacuum coating equipment based in Dresden, Germany, has made an investment in the company scia Systems GmbH. As the majority owner, VON ARDENNE will be a strong partner in supporting scia Systems on its road to success. read more